Savant AMP-8125-00 8-Channel 125-Watt Digital Audio Amplifier
- Eight channels with 125 watts into 8 ohms,
- all channels driven
- Front panel Standby power switch and
Overview
Savant Systems AMP-8125 is a multi-room amplifier for distributed audio applications. The AMP-8125 is an ultraefficient Class D amplifier delivering 8 channels of reliable amplification rated at 125 watts per channel at 8 ohms in a 1U rack-space metal enclosure.
The AMP-8125 is the ideal complimentary solution when paired with Savant’s multi-room audio solutions, and can be fine-tuned for any listening environment using the onboard independent gain controls for each channel.
The extraordinary power supply design provides the energy necessary to deliver a rich musical experience in a residential or commercial setting.
The audio-sense mode allows the turn-on sensing circuitry to detect an audio signal on an individual channel and turn the associated zone on. Once the audio signal stops, the sensing circuit waits 30 minutes and then turns that amplifier zone off. The amplifier is off when there is no audio signal present at any of the 8 inputs, but the sensing circuitry is on.
The AMP-8125 features RCA phono input jacks and screw terminal speaker connections that can accommodate up to 16-gauge standard speaker wire.
Features
- Eight channels with 125 watts into 8 ohms,
- all channels driven
- Front panel Standby power switch and
- Channel status LED indicators
- HIgh-efficiency, quiet convection-cooled
- fanless design
- Local/Bus RCA input selection and
- independent channel output level controls
- 12 volt trigger input/output and signalsensing
- channel inputs
- Power Save low-power consumption standby
- mode (less than 0.5 watts)
- Savant industrial design—can be 1U rack or
- shelf-mounted.
- Use RacePoint Blueprint™ design tool to
- configure and customize AMP-8125
Specifications
| Environmental: | |
| Temperature | 32? to 95? F (0? to 35? C) |
| Humidity | 10% to 80% Relative Humidity (non-condensing) |
| Cooling | 34 cubic feet per minute (CFM) recommended |
| BTUs | 650 BTUs per hour |
| Dimensions and Weight (without mounting feet): | |
| Height | 1.7 in/4.5 cm |
| Width | 17.3 in/43.8 cm |
| Depth | 14.9 in/37.8 cm |
| Weight | 9.2 lb/4.2 kg |
| Rack Space | 1U |
| Power: | |
| Input Power | 100-240V AC, 50/60 Hz |
| Nominal Power | 190 watts |
| Operation Parameters: | |
| Output Power | 125W RMS/channel @ 8 ohms from 20Hz - 20kHz (all channels driven) |
| Frequency Response | 20Hz - 20kHz +0dB/-1.5dB |
| Total Harmonic Distortion (THD) | 20Hz - 20KHz (At Full Rated Power) |
| Signal-to-Noise Ratio (SNR) | <-105dB below rated full power A-weighted |
| Crosstalk | <-70dB @ 14 kHz |
| Input Sensitivity | 1.12 volts for 125 watts out in 8 ohms |
| Gain | 29dB |
| Input Impedance | 100K ohms (typical) |
| Compliance: | |
| Safety and Emissions | FCC Part 15 | CE | CAN/CSA | C-Tick |
| RoHS | Compliant |
| Front LEDs: | |
| Standby Button | RED indicates that the unit is in standby mode. BLUE indicates that the system is powered on. |
| Channel Status | The LEDs on the front panel are used for diagnostic purposes. A description of the LEDs is available in the Amplifier AMP-8125 Quick Reference Guide. |