Skip to main content KOA is now WAVE. KOA is now part of the WAVE family, bringing you more locations, more products, and more possibilities, backed by the same trusted team. Account login (legacy)

Resideo 5809SS Wireless Fixed Heat Detector

5809SS
Wireless Fixed Heat Detector
Resideo Security
SKU
64032
MPN:
5809SS
  • Contains a built-in transmitter
  • Powered by a 3V Lithium Battery
  • Features a Tamper Switch

Overview

Honeywells 5809 Series wireless fixed heat and rate-of-rise temperature sensors offer expanded fire detection and installation flexibility. They are ideal for hard-to-wire locations and applications that require more than smoke detection. This is a fast and easy install with no wires to run.

Both the 5809FXT and 5809SS contain a built-in fixed temperature sensor, which will signal an alarm if the environmental temperature rises above 135 degree F. The 5809SS also incorporates an additional rate-of-rise temperature sensor. Fires typically cause a rapid rise in temperature in the surrounding area. The 5809SS rate-of-rise thermostat senses the rise in temperature and signals an alarm if the increase is 15 degree F or more per minute. The 5809 Series is UL Listed (UL 521) and CSFM approved for commercial and residential applications.

Features

  • Contain s a built-in transmitter which can send alarm, supervisory and battery condition messages to the systems receiver/control unit
  • Powered by a three-volt lithium battery. If the battery voltage gets too low, the 5809 sends a low battery signal to the control panel
  • Features a tamper switch, which causes a trouble signal to be sent to the control if the unit is removed from the mounting base
  • UL Listed for Commercial (when using 5881EH Receiver) or Residential applications

Specifications

Dimensions4.5" Diameter , 2.5" Depth
Battery3V lithium (Duracell DL123A, Panasonic CR123A, HUIDERUI CR123A)
Operating temperature40?F to 135?F (4?C to 57?C)
Rate-of-rise temperature15?F (8?C) increase per minute (NOTE: Rate-of-rise sensor (5809SS only) does not operate above 38?C)
Fixed temperature135?F (57?C)
Maximum spacing50 ft x 50 ft UL, 30 ft x 30 ft FM (refer to National Fire Alarm Code Standard NFPA 72 for application requirements)
Input Voltage Range3 VDC
Form FactorCeiling Mount, Wall Mount
Weight0.8 lbs

Support

Product Sheet

Download