Please login to display your prices

13-Outlet Linear Ac Power


SMP provides the highest level of protection available Lift significantly reduces AC line noise E.V.S. protects equipment from dangerous overvoltage conditions Zero ground contamination circuitry protects critical digital components Power Factor Technology provides over 55 Amps peak charge surplus current for power-starved amplifiers Ultrasonic bi-filtering isolates digital and video circuits from analog components Retractable LED lamps illuminate a cabinet or rack full of equipment Detachable module for telco surge suppression and 3 pairs of cable / satellite TVSS isolated F-connectors12 Volt triggering for remote control

Furman Elite-20 PF i Ultra Linear AC Power Source – Ultra-line Profile with Superior Technology

The extreme AC demands encountered in the professional audio / video arena have required technological developments far in excess of typical home theater/audiophile power products. In studios, live sound, and broadcast facilities, breakdown is unacceptable. Equipment failure or poor performance is costly. The same is true of todays home theater. Furmans solution based technology, extensive engineering expertise, and robust build quality have answered the challenge of todays corrupted power lines, and led to the creation of the Elite-20 PF i.

Use Your Entertainment Equipment Up to Its Full Potential

With todays chaotic demands on many municipal power facilities, AC voltage is often reduced so that it can be stretched to fulfill excess demand. This creates a substantial negative impact on your systems performance. Power amplifiers and powered sub-woofers cannot perform to their full potential. Even a relatively modest reduction in AC voltage can obliterate the sonic impact of an otherwise superior system. Just as problematic are excessively high line voltages. Excess voltage can overheat sensitive circuits; lower the life and reliability of projector lamps, and cause many circuits to shut down. With the SPR-20is exclusive Stable Power AC Voltage Regulation Technology, voltage-starved power amplifiers and powered sub-woofers perform at their full potential. With the SPR-20i, home theaters are supplied with constant, virtually unwavering AC voltage. This assures trouble-free service for any environment suffering from unstable power.

Delete the Line Noise and Get Pure Quality Sound

Todays power lines are plagued with RF and EMI noise. When connecting sensitive equipment to your homes power outlet, AC noise couples into your systems critical components, masking low level signals and crippling performance. This low level content is critical because it relays the crucial harmonics and ambience in audio, as well as the depth and clarity in video. The Elite-20 PF i is so substantial in its ability to unmask critical signal content, its performance is surpassed only by the Furman Reference Series. With Furmans Ultra-Linear Filtering, televisions, projectors, DVD players, amplifiers, and processors are fed pristine AC power. For the first time, you will see and hear your theater or audio system as it should be — uncompromised.

Uncompromising Surge Protection

Another critical feature is our exclusive Series Multi-Stage Protection featuring Extreme Voltage Shutdown (EVS). This virtually maintenance-free surge suppression assures the highest level of AC protection possible, without sacrificing itself when the offending surge is severe — no damaged equipment, no service calls, no down time. Further, our famous retractable front panel LED lamps allow easy viewing of either a rack or cabinet full of equipment, even when your theater lights are off.

The Elite-20 PF i also features remote control capability via 12V triggering, compatible with the 12V triggering devices commonly found in power receivers and pre-amp processors. Additional products (such as a remote subwoofer) can be daisy-chained from the 12V output jack for an additional triggered unit. The 12V triggering feature may be bypassed if desired.

Unique Technology for Clean, Clear Sound and Video

The essence of the Elite-20 PF i is Furmans unique Power Factor Technology. For the first time, low-level analog, digital, and video components are not modulated or distorted by the power amplifiers extreme AC current demands. Further, the power amplifier is fed a highly filtered, extremely low-impedance supply of AC power. The Elite-20 PF i, in fact, has in excess of 4 Amps of continuous current reserve (over 55 amps peak charge) for the most extreme peak power demands. This technology enables power amplifiers and powered subwoofers to operate at maximum efficiency, reaching levels of performance previously unattainable.

No longer will your amplifiers performance be at the mercy of your homes incoming AC power or inferior AC protection/filtering devices. The net effect is as if your power amplifier virtually doubled in power and improved immeasurably in quality.

When employing the Elite-20 PF i, you will immediately notice far clearer, stunningly focused sound and visual images from your system. Video presentation will be crisp and colors true with greater gray and black scale definition, as well as noticeably improved depth and clarity. Sonic transients will be startlingly fast with bass fundamentals that shake foundations with their weight and visceral impact. Mid and high frequencies will bloom with sweet, non-glaring ease as imaging improves dramatically, all the while remaining true to your systems inherent virtues.


  • Input - 20 Amp capacity required Output - 16-20 Amps RMS (maximum, all outlets combined - continuous)
  • Transverse (Differential) Mode:> 40 dB from 5Khz. - 100 kHz.>80 dB from - 100 kHz. - 1GHz.
  • Common Mode:>40dB from 10Hz. - 30 kHz.>20 from 40 kHz. - 1MHz.
  • Ultra-Linear AC power conditioner with Power Factor


Manuals & Technical Documents

SpecificationFurman-Elite-20-PF-I-Spec Sheet.pdf