Overview
The PowPak CCO Module is a low-voltage radio
frequency (RF) control that provides a single dry contact
closure output based on input from Pico remote controls
and Radio Powr Savr occupancy and daylight sensors. It
can be powered by to 24 V~ or 24 V- for easy
connection and integration into building management,
HVAC, VAV, and other 3rd-party systems.
Communication with RF input devices, such as Pico
remote controls and Radio Powr Savr sensors, is
accomplished using Lutron Clear Connect RF
Technology.
These products are also compatible with the Vive hub
which enables a simple setup process using a standard
web browser on any Wi-Fi enabled phone, tablet or
computer. It also enables control and monitoring of all
Vive devices. The Vive hub can be added at any time.
System reprogramming will be required. For a complete
list of features supported with the Vive hub, see
specification submittal 369902.
Note for Replacement: RMJS/URMJS - the S model
can replace the non-S model.
Specifications
Sub Brand: Vive PowPak
Application:
Type: Contact closure module
Color:
Mounting: Surface or junction box
Voltage Rating:
Wattage:
Actuator:
Connection:
Gang:
Frequency Rating:
Standard: UL, UL 2043, FCC, IC, COFETEL
Operating Temperature: 0 to 55 degrees celsius
Special Features: Low-voltage radio frequency (RF) control that provides a single dry contact closure output based on input from Pico controls and Radio Powr Savr occupancy and daylight sensors. It can be powered by 24 VAC or 24 VDC for easy connection and integration into building management, HVAC, VAV, and other 3rd-party systems. Communication with RF input devices, such as Pico controls and Radio Powr Savr sensors is accomplished using Lutron Clear Connect RF Technology. Single contact closure output includes both normally open (NO) and normally closed (NC) dry contacts. Maintained output type. Receives wireless inputs from up to nine Pico controls, six Radio Powr Savr occupancy/vacancy sensors, and one Radio Powr Savr daylight sensor. Screw tabs provided for surface mounting (recommended); or mounts to a U.S. style junction box through a standard size knockout.