Please login to display your prices

PG9936
PowerG Wireless Smoke & Heat Detector
SKU
78397
MPN:
PG9936

Overview

The DSC PG9936 is a wireless PowerG smoke and heat detector that can be used with the DSC PowerSeries Neo systems as well as the Qolsys IQ Panel 2 Plus systems.

The PG9936 works on the 915 MHz frequency, can be mounted on a wall or ceiling, and comes with the hardware to do so. Just as every PowerG device; the PG9936 features mutli-channel frequency hopping to help prevent frequency blocking and interference. It also uses 128 bit AES encryption to provide protection against analysis tools and digital attacks. Another preventive measure this contains is a back tamper in case someone tries to remove it from its mounting position. The PG9936 uses 3 AAA batteries for power which will last an average of 3 years and measures in at 5 x 2.5 in.

This smoke/heat detector makes installation easier because of the built-in link quality indicator located on the device itself. To help insure everyone in the area is notified of a fire; the PG9936 features an on-board sounder and a visual indicator. The unit will also send device tamper and low battery conditions to the main alarm. Because of the technology behind the PG9936; this will provide reliable monitoring and early detection of fire conditions.

Features

  • Provides accurate early fire warning, with audio and visual alerts, when smoke or high temperature is detected
  • Enhances safety and facilitates maintenance, with alerts for device tampering and low battery
  • Robust industry leading PowerG commercial grade wireless technology
  • Offers long-lasting value with a 3-year battery life (with typical use)
  • Large transmission range enables repeater-free installations
  • Speeds up installations with visible link quality indicator on the device
  • Simple wall or ceiling installation, with bracket
  • Protected by a back tamper

 

Support

Manuals & Technical Documents

SpecificationDSC Security-PG9936-Spec Sheet.pdf