MartinLogan Dynamo Outdoor Sub 100 10" Passive Subwoofer
- 10" Poly cone woofer
- All-weather Subterranean design
- 8-Ohm 400 Watts
- Dark Bronze finish
Overview
Outdoor Living subwoofer enclosures disappear just below the surface of the ground, with only its unobtrusive “mushroom cap” port visible. The enclosure is constructed of high-density polyethylene, the same material that ensures a long life for underground water systems. This enclosure can withstand flooding rains and wild temperature extremes, and has been successfully tested underwater and in environments from -20°F to 185°F.
The woofer’s low-heat design is vented through the “mushroom cap,” providing a constant flow of fresh air while always protecting the system from harsh weather and water. The flared port system, combined with our polypropylene cone woofer and a high-intensity magnet structure, adds deep, musical bass to the whole area with no chuffing or extraneous vibration. Bury the subwoofer nearby, or install it under your decking, and add a surprisingly vibrant low end to your outdoor entertainment.
Features
- 10" (25.4cm) mineral filled poly cone woofer.
- 2" (5cm) high-power oversized voice coil
- 4-layer on fiberglass bobbin
- 8-Ohm Impedance
- Maximum Input Power 400 Watt
- Subterranean design
- Dark Bronze (canopy
- Size (H x W x D, barrel, pipe, and canopy) 23.6” x 15.8” x 18” (60 x 40 x 45.7 cm)
Specifications
|
Frequency Response |
33-135Hz ±3dB |
|
Recommended Amplifier Power |
20-800 watts per channel |
|
Sensitivity |
Room: 88 dB, Anechoic: 82 dB |
|
Impedance |
8 ohms Compatible with 4, 6, or 8 Ohm rated amplifiers. |
|
Low Frequency Transducer |
10"(25.4cm) mineral filled poly cone, 2"(5cm) high-power oversized voice coil, 4-layer on fiberglass bobbin |
|
Inputs |
Speaker Wire |
|
Weight |
48 lbs. (21.8 kg) |
|
Dimensions barrel only |
9.8" x 15.8" x 15.8 " |
|
Dimensions canopy |
6.1" x 10.3" x 10.3" |
|
Dimensions barrel, pipe, and canopy |
23.6" x 15.8 " x 18 " |