OM-515POE
Omega Series 1080p Decoder (Receiver) with USB and Stereo Audio Out
- Compatible with both 2G and 3G systems
- Decodes a 1080p or lower source device from network & converts to HDMI
- Supports HDCP 1.4
Recommended Products
Overview
The Just Add Power 2GΩ/3G+ Receiver combines the enhanced audio and Features-set of the 3G system with the maximum 1080p resolution of 2G devices.
2GΩ/3G+ devices can be installed in 2G and 3G systems. In 2G systems, a 2GΩ/3G+ Receiver is a direct replacement to a 2G+ Receiver and functions just like a 2G+ device.
In 3G systems, 2GΩ/3G+ Receivers provide a lower-cost solution for displays that will only show sources at 1080p resolution or lower.
Build a future-proof infrastructure. Just Add Power 2GΩ/3G+ integrates seamlessly with both 2G and 3G. Build a 2GΩ system with 4K expansion plans or mix-and-match with 2GΩ on 1080p sources and 3G on 4K sources!
Specifications
| CONNECTIONS | |
| Ethernet: | (1) Gigabit Input |
| Power: | Power via POE. Also has 4.7-23 Volt Input |
| HDMI Output: | (1) HDMI Output |
| RS232: | (1) RS232 3.5mm for Control of display device or IR Module |
| USB: | (2) USB 2.0 |
| INSTALLATION | |
| Size: | 5.7″ W x 5″ D x 1.2″ H |
| AUDIO VIDEO SPECS | |
| Audio Capabilities: | Lossless Audio - Including Dolby Atmos |
| Video Capabilities: | 480P,720P,1080P |
| ADDITIONAL SPECS | |
| Mix and match: | This is cross compatible with the 2G Series and 3G series. Mix and match to built the ultimate matrix |
| RS232: | Drivers are available to turn this RS232 into an extension of your control systems |
Support
Manuals & Technical Documents
SpecificationJust Add Power-VBS-HDIP-515POE-Spec Sheet.pdf







