The IQ Hardwire 16-F (Large Enclosure) offers a cost effective way of integrating hardwired security & smoke detector zones with the IQ Panel 2. It includes a large enclosure with ample wire routing room, backup battery charging, 500mA of 12volt auxiliary power, an onboard siren relay, built-in status LED’s for each zone and support for up to 10 two-wire smoke detectors. Normally Open and Normally Closed contacts are supported as well as powered zones like motion sensors and glass break detectors.

Features

• Large plastic enclosure with ample wiring room, backup battery holder, and an expansion slot for second module
  
• Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
  
• Supports up to ten two wire smoke detectors
  
• LED lighted zones for ease of “learn-in” installation/troubleshooting
  
• EOL supervision using 4.7K Ohm resistors (included) or 1k-10k Ohm depending on Resistor Mode
  
• Up to 500 Milliamps of power for hardwired motion detectors, glass break detector, and/or sirens
  
• Charging circuit for back-up battery, fully supervised with power outage recovery