ZC-1
Wall Mounted Programmable Zone Controller
SKU
76673
MPN:
ZC-1
Overview
The ZC-1 from dbx is a wall-mount programmable rotary volume control for use with DriveRack 260, 220i, and ZonePro systems. It has two RJ-45 connectors for use with CAT5 cables. Maximum cable length will vary depending on number of zone controllers connected to a system.
Specifications
Specifications:
- Connectors: (2) RJ-45
- Series Wiring: Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.
- Parallel Wiring using ZC-BOB: Up to Six Zone Controllers: 1000 ft.
- Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher.
- Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065
Support
Manuals & Technical Documents
ManualsDBX-ZC-1-Manual.pdfSpecificationDBX-ZC-1-Spec Sheet.pdf