Please login to display your prices

10-210486-22
KX2 2.8" In-Wall Touchpanel Keypad
SKU
39876
MPN:
10-210486-22

Overview

The KX2 in-wall controller has a clean sleek design with twelve programmable hard buttons and a 2.8" color touchscreen. The hard buttons and graphic interface are fully programmable using RTIs Integration Designer software for full control of electronics throughout the building. A built-in infrared output port allows direct control or get two-way control when used with an RTI XP series control processor. In addition the units integrated 10/100Base-T Ethernet port with Power-over-Ethernet (POE) provides the flexibility to accommodate any installation.

Features

  • Fully programmable 2.8" touchscreen display and twelve hard buttons.
  • QVGA resolution (240w x 320h) TFT LCD to display custom buttons text and graphics.
  • Integrated 10/100Base-T Ethernet port with Power-over-Ethernet.
  • IR output drives up to 1000 feet of wire.
  • Proximity sensor automatically wakes the unit up when approached by the user and an ambient light sensor adjusts the brightness.
  • Integrated mounting wings for easy installation in retrofit installs.
  • Fits in a 4"x4" square electrical junction box (See installation guide for important information).
  • Ships with stylish low-profile white bezel - bezels also available in black and light almond.
  • Faceplate and buttons are black with a glossy finish.
  • Twelve hard buttons may be interchanged and custom laser engraved using Laser Shark.
  • Optional modules/processors for voltage sensing relays and advanced two-way control.
  • USB and Ethernet programming.

Specifications

Power+9VDC to +16VDC, 1A max
Power ManagementAdjustable backlight brightness, Ambient light sensor, Proximity sensor
Touchscreen DisplayHigh-brightness color TFT LCD
QVGA (240w x 320h pixels) with 65K colors
Integrated high-resolution resistive touchscreen
Display Size2.8" (71mm) diagonal
Display BacklightLED Backlit, 200nit
Infrared OutputThrough control port, 200mA output
Drives up to 1000 ft (300 m) of wire
Ethernet Port10/100 Base-T with Power-over-Ethernet
AudioBeeper
Operating Temperature+32°F to +122°F (0°C to +50°C)
Operating Humidity5% to 95% Non-condensing
Total System Memory32MBytes Flash (non-volatile) memory
Device CapabilityTotal number of devices is limited only by memory
Macro CapabilityUnlimited steps in a single macro
Total number of macros is limited only by memory
Macro capability on every button
CommunicationsUSB programming port
EnclosureHigh-impact molded ABS plastic
MountingIntegrated mounting wings, or screws through front bezel
Front Plate Dimensions (H x W)4.4 in (112mm) x 4.6 in (117mm)
Installation Cut-Out (H x W)3.789” in (96.5mm) x 3.789” in (96.5mm)
Total Depth in Wall1.2 in (31mm) Plus cables
Weight7.5 oz (212g)
WarrantyOne Year (Parts & Labor)
 All Specifications subject to change without notice.
 The KX2 uses a standard 4"x 4" electrical junction box. These should be available at most hardware stores or electrical supply stores online (ex. Granger.com)

Support

Manuals & Technical Documents

ManualsRTI-10-210486-22-Manual.pdf
SpecificationRTI-10-210486-22-Spec Sheet.pdf