Versa MINI-433 Low-Profile Wireless Door/Window Contact
MINI-433
Low-Profile Wireless Door/Window Contact
SKU
209238
MPN:
MINI-433
- Patented Bluefield Magnet Indicator
- Ultra-Low-Profile Design
- Diagnostic LED Set
Overview
A clean, low-profile door/window contact built for the DSC world — PowerSeries, Iotega, and Impassa. At just 0.25" thick, the MINI-433 sits nearly flush against the frame and slips into spots where the bulkier DSC factory contact (WS4945) won't fit. The patented Bluefield magnet indicator confirms placement at the door, so you skip the trial-and-error trips back to the panel. Single zone, fully supervised, and engineered around the install workflow.
Features
- Patented Bluefield magnet indicator — blue LED lights when the magnet is within range; confirm placement before you commit the tape
- Ultra-low-profile design — 2.2" × 1" × 0.25" transmitter is roughly half the depth of the DSC WS4945; fits tight casing and narrow frames
- Diagnostic LED set — blue (magnet in range), green (transmit confirmation), red (low-battery alert flashes once every five seconds after a trip)
- 1" magnet gap on wood, 1/4" on metal — tolerant placement for real-world frames
- Tamper + reed switch — full supervision; tamper trips on cover removal
- 5+ year battery life on a single Panasonic CR2032 coin cell
- Slide-off cover — clean tool-free battery service
- 433 MHz — drops into DSC PowerSeries (NEO, 1832, 1864), Iotega, and Impassa installations
- UL listed · FCC · IC · 95% RH non-condensing · 32–122°F operating range
Specifications
| Frequency | 433 MHz |
| Panel Compatibility | DSC PowerSeries (NEO, 1832, 1864) · DSC Iotega · DSC Impassa |
| Supervision | Yes — fully supervised single-zone transmitter |
| Device Type | Single-zone door/window contact |
| Bluefield Magnet Indicator | Yes — blue LED confirms magnet is within range during install |
| LED Indicators | Blue (magnet in range) · Green (transmit) · Red (low battery) |
| Reed & Tamper Switch | Internal reed switch · tamper trips on cover removal |
| Magnet Gap | 1" on wood · 1/4" on metal surfaces (max) |
| Transmitter Dimensions (L × W × H) | 2.2" × 1" × 0.25" (55.9 mm × 25.4 mm × 6.4 mm) |
| Magnet Dimensions | 1" × 0.25" × 0.25" (25.4 mm × 6.35 mm × 6.35 mm) |
| Mounting | Surface mount — double-faced tape included |
| Enclosure | Slide-off cover for tool-free battery service |
| Battery | 1 × 3VDC Lithium Coin Cell — Panasonic CR2032 (225 mAh) |
| Battery Life | 5+ Years |
| Operating Temperature | 32° to 122°F (0° to 50°C) |
| Relative Humidity | 95% non-condensing (UL tested at 85%) |
| Use | Indoor — residential & commercial |
| Agency Listings | UL · FCC · IC |