Please login to display your prices

Filtering AC Power Conditioner
Click image to open expanded view


Furman builds some of the most rugged and robust power protection gear around. The Elite-15 PFi is an impressive introduction to Furmans exclusive technologies for maximizing the protection and performance of your audio and video components. Many of these technologies were originally developed to meet the extreme AC power demands of professional recording film and broadcast studios.


  • 13 AC outlets with three isolated banks:
  • one bank of 4 outlets (2 unswitched 2 switched)
  • one bank of 4 outlets with additional ultrasonic filtering for digital or video components (2 unswitched 2 switched)
  • one bank of 4 high-current outlets with Power Factor Correction peak current charging (2 unswitched 2 switched with delayed turn-on)
  • one unswitched front-panel convenience outlet
  • rear-panel AC outlets use hospital-grade connectors to grip plugs firmly
  • Series Multi-Stage Protection surge suppression system can withstand multiple catastrophic voltage spikes
  • Extreme Voltage Shutdown circuitry monitors incoming AC and automatically cuts off power to connected equipment if overvoltage is detected
  • Power Factor Technology "current reservoir" for amplifiers receivers and subwoofers (over 45 amps peak charge)
  • wide-bandwidth EMI/RFI noise filtering for clearer sound and picture
  • 3 sets of coaxial RF connections for cable TV satellite and antenna
  • RJ-11 phone line input and output
  • 12-volt trigger input with bypass button
  • maximum current rating: 15 amps
  • 2 retractable front-panel LED lamps to illuminate an equipment rack or cabinet
  • 17"W x 4-1/8"H x 17-1/2"D
  • weight: 15 lbs.
  • warranty: 3 years


AC Current CapacityInput - 15 Amp capacity required
Output - 11-15 Amps RMS (maximum, all outlets combined - continuous)
Linear Noise AttenuationTransverse (Differential) Mode:
40 dB from 10 Khz. - 100 kHz.
80 dB from 2 Khz. - 100 kHz. – 1GHz.
(Linear attenuation curve from 0.05 – 100 ohms line impedance)
Outlets1 (linearly filtered outlet - front panel)
4 (linearly filtered outlet - rear panel, 2 switched via 12V trigger)
4 (linearly filtered outlets with additional ultrasonic filtering for digital or video components, 2 switched via 12V trigger)
4 (power factor corrected amplifiler outlets - 3 amps RMS reserve - resistive load - over 45 amps peak charge, 2 switched with 5 second delay via 12V trigger)
Transient Voltage Surge Suppression120 VAC - Series Multi-Stage Protection - Non-Sacrificial with Zero Ground Contamination.
Extreme Voltage Shutdown
Cable / Satellite (less than .1dB insertion loss)
Dimensions(H x W x D) 4 In x 17 In x 14.75 In (Standard 2 RU height without feet)
Weight15 lbs.
Power Consumption12 Watts for display and control circuits independent of actual load.
Safety Agency ListingNRTL-C