Elura WIRELESS-SUB-KIT 5.8G Wireless Subwoofer Kit
- Wireless Subwoofer Kit
- 5.8G with automatic frequency hopping
- Up to 50 ft (15 m) range
- Stereo (R/L) or LFE
Overview
The Elura Wireless-Sub-Kit eliminates the need to run cables around doors or under carpet to connect your subwoofer or rear surround speakers to your receiver/amplifier. Subwoofer location in your room can affect low frequency performance will not be limited by wire connections.Â
Using the Elura Wireless-Sub-Kit simplifies subwoofer or powered surround speaker's placement that would otherwise be unusable due to cable length or location. The Elura Wireless-Sub-Kit provides excellent interference-free operation for all audio applications since it operates in the 5.8GHz frequency band. Simply connect the wireless transmitter module to your receiver/amplifier and the wireless receiver to your powered subwoofer or powered speakers, pair the units and enjoy problem-free listening.Â
Features
- Wirelessly connect your subwoofer or any audio component to your system
- Easy one-time set up
- 5.8G frequency band for excellent sound and interference-free RF connection
- Automatic frequency hopping will find a clear channel if any RF interference is detected
- Up to 50' working distance
- Full-range stereo left and right audio with RCA connectors on both the Transmitter and Receiver
- Unique receiver LFE sub-out with RCA connector feature
- Contents included: Wireless Transmitter and Receiver, 2-AC power supplies, 2-power supply cables, 1 mounting bracket, 2 pieces of velcro, 2-3x12mm Phillips-Head bracket mounting screws, 1 manual
Specifications
| RF Operating Frequency | 5.8GHz |
| Modulation | GFSK w/ frequency hoping, 5.0G-5.83G |
| Transmitter RF Output Power | 10dB +/- 2dB |
| Receiver RF Sensitivity | -90dBm |
| Left/Right Audio Frequency Response | 20 Hz - 20 kHz |
| LFE Audio Output Frequency Response | 20 Hz - 500 Hz |
| Audio Sampling Rate | 48 kHz |
| Max Transmitter Audio Input Voltage | 2V |
| Max Receiver Audio Output Voltage | 2V |
| Typical Range | 50' |
| Total Harmonic Distortion | < 0.1% |
| Channel Separation | ≥ 75dB |
| Signal-To-Noise Ratio | > 75dB |
| Delay Time | < 1ms |
| Safety Certification | FCC |
| Power Requirement | 5VDC, 60mA |
| Power Connector | USB-C |
| Case Dimensions | 3.54" x 3.35" x .945" 3.62" deep with RCA connectors |
| Transmitter Mounting Bracket Dimensions | 3.66" x 1.97" x 1.05" |
| Net Weight | TX: .204 lb RX: .216 lb |