Please login to display your prices

RadioRA 2 Visor Control Receiver


RadioRA 2 Visor Controls allow lights, shades /draperies, and other equipment to be controlled from the car with just a touch of a button on a Visor Control Transmitter or a HomeLink compatible visor control. Up to ten (10) Transmitters can be used with a Visor Control Receiver. The Receiver provides two (2) Contact Closure Inputs (CCI) for integration with other systems and one (1) CCI for security systems. The CCIs can be configured to accept maintained or momentary contact closures. The security input is always a maintained CCI. The Receiver also has four (4) maintained or momentary Contact Closure Outputs (CCO) to control up to four (4) garage doors or motorized gates. Pre-printed and blank labels are included with the Visor Controls for naming scenes or buttons on both the Receiver and the Transmitter.


Model NumbersRR-VCRX-WH
Power Receiver9 V 300 mA DC
Adapter: Input120 V 60 Hz 6.5 W
Adapter Output9 V 300 mA
Adapter Transmitter6 V 10 mA (2-CR2032, included - 10 year lifetime)
Typical Power Consumption1.6 W Test conditions: two LEDs on (two presets active), powered by the 9 V adapter supplied, no CCOs or CCIs active.
Regulatory ApprovalsDC adapter: UL Listed for U.S. and Canada, NOM Receiver/Transmitter: FCC, IC, COFETEL, ANATEL
Environment:Receiver: Ambient operating temperature: 32 ?F to 140 ?F (0 ?C to 60 ?C), 0% to 90% humidity, non-condensing. Indoor use only.
Transmitter: Ambient operating temperature: -40 ?F to 235 ?F (-40 ?C to 113 ?C), 0%-90% humidity, non-condensing. Meets the Society of Automotive Engineers (SAE) temperature standards.
CommunicationsVisor Controls communicate with the system through Radio Frequency (RF). The Receiver must be located within 30 ft (9 m) of a Repeater. The typical operating distance between a Receiver and a Transmitter is 150 ft (46 m). System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
ESD ProtectionTested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge ProtectionTested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
MountingMount Receiver on a wall, ceiling, or level surface using the two #6 (M3) screws provided. Clip Transmitter to a vehicle?s visor.
Connections2 Contact Closure Inputs, 1 security input, and 4 momentary or maintained Contact Closure Outputs.
Warranty1 Year Limited Warranty.
Design FeaturesEach output can be controlled locally at the Receiver or remotely by a Transmitter or keypad button.
The Receiver ?Keypad? or ?Inputs? buttons can be programmed to light and shades /draperies. Design Features
Full or Flash security options.
The Transmitter can remotely control the ?Keypad?, ?Security Input?, and ?Outputs? buttons on the Receiver.


Manuals & Technical Documents

SpecificationLutron-CONNECT-BDG2-1-Spec Sheet.pdf