WELCOME TO THE NEW WAVE WEBSITE

RTI RM-433 433Mhz RF Receiver Module

SKU
11437
MPN:
10-210039-16
Click image to open expanded view

Overview

The RM-433 is a radio frequency receiving device that operates at 433MhZ. It is designed to receive signals that are transmitted by RTI universal system controllers.

The RM-433 contains a microprocessor that monitors all received signals so that RF noise and data from non-RTI transmitters is filtered out. When valid RTI data is detected, the RM-433 passes the signal through its output driver which allows the data to travel long distances over wire. The output driver is compatible with industry standard infrared repeating systems , and can be wired together with those systems or with additional RM-433 units. This allows RTI control systems to be controlled from almost any location with either IR or RF transmitters.

The RM-433 does not directly control A/V components - it is for communicating trigger codes to RTI control processors only. Use of second party infrared repeater systems may be used between the RM-433 and RTI control processor as a path for the RTI trigger code only. A 433MHz remote control must be used with this model of antenna. It is not compatible with the 2.4 GHz Zigbee enabled remote controls.

Features

  • Reliable RF reception due to matched antenna, connector, and PCB.
  • Modular design that allows multiple RM-433 units to be wired together. This allows for any desired coverage area.
  • Output signal is compatible with industry standard infrared repeating systems. This allows multiple IR and/or RF receivers to be wired together into an RTI control system.
  • No dedicated power supply required. Power is derived directly from the RTI control system.
  • A feedback LED confirms operation.
  • Available only to professional system integrators.

Specifications

SPECIFICATIONS: 
Power Requirements+9VDC to +16VDC @ 60mA
RF Carrier Frequency433.92 MhZ
Output Drive200mA maximum
Operating Temperature+32°F to +122°F
(0°C to +50°C)
Operating Humidity5% to 95% non-condensing
Module Dimensions3.5 In x 3.4 In x 1.0 In
(89mm x 86mm x 25mm)
Antenna Length13 In (330mm)
Weight4.4 oz. (125 grams)

Support

Manuals & Technical Documents

Manuals RTI-10-210039-16-Manual.pdf
Technical Drawings RTI-10-210039-16-Technical Drawing