Please login to display your prices

ESC-2+ Ethernet to Serial Convertor
Click image to open expanded view


The second generation ESC-2+ Ethernet to Serial Converter provides a convenient way to add two RS-232 ports to an RTI XP series control processor. Wire the ESC-2+ to the local Ethernet network for full two-way control, as if the device was wired directly to the control processor. Two built-in RJ-45 jacks and the included RJ-45 to DB9 adapters allow Cat-5 cabling between the ESC-2+ and the device being controlled. This allows full RS-232 control virtually anywhere there is access to an Ethernet network connection. The ESC-2+ model includes a reset button, which allows the unit to be set back to default settings.

NOTE: Cabling from the ESC-2+ to the device being controlled is limited to 30-70 feet depending on baud rate and other factors.


  • Provides two additional serial ports to an RTI control processor.
  • Use multiple ESC-2+ modules for virtually unlimited control of serial devices.
  • Capable of two-way serial communication.
  • Integrates seamlessly into Integration Designer.
  • Can be discovered and configured by Integration Designer over Ethernet.
  • Easy wiring to devices using cat-5 cable - Includes two RJ-45 to DB9 serial adapters.
  • Reset button allows ESC-2+ to be set back to factory defaults.


Power+5VDC, 1.0A
Serial (RS-232) PortsTwo, RJ45
Includes two RJ-45 to DB9 adapters
Ethernet PortOne, RJ-45
EnclosureABS Plastic
MountingWall-mount or free standing
Dimensions (H x W x D)W/tabs 2.8” (71mm) x 1.8” (45mm) x 1.0” (25mm)
Weight1.7oz (50g)
WarrantyOne Year (Parts & Labor)


Manuals & Technical Documents

Installation GuidesRTI-10-210554-18-Installation Guide.pdf