Skip to main content KOA is now WAVE. KOA is now part of the WAVE family, bringing you more locations, more products, and more possibilities, backed by the same trusted team. Account login (legacy)

Elura AMP50/3-ARC 3-Channel 75-Watt Amplifier with ARC

AMP50/3-ARC
3-Channel 75-Watt Amplifier with ARC
ELURA
SKU
187272
MPN:
AMP50/3-ARC
  • 3 Channel (LCR) Amplifier
  • 50 Watts L&R, 75 Watts Center
  • HDMI Input with ARC (Audio Return Channel)

Overview

The Elura AMP50.3-ARC is a versatile 3-channel amplifier designed to deliver high-quality sound for home audio and entertainment systems. With 50W per channel (left & right) 75W Center and ARC (Audio Return Channel) support, this amplifier seamlessly integrates with modern TVs and audio setups, providing enhanced clarity and immersive sound.

Features

  • 3 Channel (LCR) Amplifier
  • 50 Watts Left & Right at 8 ohm
  • 75 Watts Center at 8 ohm
  • Small Size, Lightweight
  • Short Circuit & Thermal Protection
  • HDMI Input with ARC (Audio Return Channel)
  • Variable Center Channel Output
  • Analog RCA Inputs
  • Optical Input
  • Wireless Audio Connectivity
  • Variable Sub Output
  • Auto On
  • Trigger On
  • Front Panel LED’s Indicate Mode & Remote Learning Confirmation
  • Handheld Remote Included
  • TV Remote IR Learning Capability
  • Extendable IR Receiver Included
  • Brackets for Vertical Wall/Cabinet Mounting Included
  • Outboard Power Supply and Mounting Bracket Included (AC110 – 230V Input to 28VDC Output)

Specifications

Amplifier Specifications
Model AMP50/3-ARC
Product Type 3-Channel LCR Amplifier with ARC
Number of Channels 3 channels: Left, Center and Right
Power Rating per Channel 50W Left and Right / 75W center at 8Ω
75W Left and Right / 80W Center at 4Ω
Frequency Response 20Hz-20kHz
Total Harmonic Distortion (THD+N) ≤0.5%
Input Sensitivity 730mV Left and Right; 560mV Center through AUX IN
Input Impedance 10kΩ
Signal-to-Noise Ratio ≥86dB
Subwoofer Output Level Variable, 2V maximum
Subwoofer Output Frequency Response 20Hz-100Hz; -3dB at 130Hz with 12dB/octave roll-off
Protection Short-circuit and thermal protection
Auto-On Sensitivity 4mV
Auto-Off Delay Approximately 30 minutes
Wireless Audio Receiving Range >10m
Wireless Audio Pairing Name AMP50/3-ARC
HDMI Supports ARC and eARC
Safety Certification FCC
Power Requirement 28VDC, 7.1A
Chassis Dimensions (W × D × H) 203 × 132 × 36mm (7.992" × 5.197" × 1.417")
233mm (9.173") wide with mounting brackets attached
38.8mm (1.527") high with rubber feet
Net Weight 0.97kg (2.14lb)
Inputs and Outputs
HDMI Input 1 × HDMI ARC/eARC input
Analog Audio Input 1 × stereo RCA AUX input
Optical Audio Input 1 × Toslink digital optical input
Wireless Audio Input Supported
IR Input 1 × 3.5mm TRS input for supplied IR receiver
Trigger Input 5-12VDC, positive tip
Subwoofer Output 1 × variable RCA line-level output
Speaker Outputs 6-position Phoenix-style connector for Left, Center and Right speakers
Center Channel Gain Adjustable from 0dB to +6dB
Operating Modes and Controls
Default Input Selection D1 Up / D2 Up: Wireless Audio
D1 Up / D2 Down: ARC
D1 Down / D2 Up: Optical
D1 Down / D2 Down: AUX
Volume Mode D3 Up: variable volume; D3 Down: fixed volume
Auto-On Mode D4 Up: automatic signal sensing; D4 Down: manual remote power control
IR Learning Mode D5 Up: Run; D5 Down: Learn
Learnable IR Commands Power On/Off, Mute, Volume Down and Volume Up
Remote EQ Controls Bass and treble boost, cut and flat; ±6dB
Front-Panel LED Modes Wireless Audio: left LED blue
ARC: right LED yellow
Optical: left LED purple
AUX: right LED green
Standby: left LED red
IR Receiver Specifications
Receiving Distance Up to 10m
Angle of Acceptance ±45° from center line
Operating Voltage 2.7-5.5VDC
Plug Configuration Tip: VCC; Ring: IR signal; Sleeve: ground
IR Receiver Dimensions 16.7 × 29.5mm (0.657" × 1.16")
Cable Length 1.5m (4.9ft)
Remote Control Specifications
Button Functions Power, Mute, Wireless Audio, ARC, Optical, AUX, Volume Up/Down, Bass Up/Down/Flat and Treble Up/Down/Flat
IR Transmit Distance Up to 10m
Battery CR2025
Dimensions (H × W × D) 86 × 41 × 7mm (3.38" × 1.61" × 0.276")
Power Supply Specifications
Input Voltage 110-230VAC, 50/60Hz, 3.0A
Output Voltage 28VDC, 7.1A
Protection Over-current and short-circuit protection
Energy Efficiency Level VI
Safety Certifications cULus, FCC, CE and UKCA
AC Cable Removable 3-prong grounded cable, 1.5m (4.9ft)
DC Cable Hardwired 2-conductor cable with 5.5mm DC connector, 1.5m (4.9ft)
Power Supply Dimensions (L × W × D) 152.4 × 65.4 × 35mm (6" × 2.57" × 1.38")
Power Supply Net Weight 0.55kg (1.2lb)
Mounting Bracket Dimensions (L × W × D) 90 × 69 × 39.5mm (3.54" × 2.72" × 1.55")
Package Contents
Included Components 1 × AMP50/3-ARC amplifier
1 × Power supply
1 × Power supply mounting bracket, safety strap and screws
1 × IR receiver with mounting adhesive
2 × Amplifier mounting brackets
1 × Handheld remote control with battery
1 × User manual
Warranty
Limited Warranty 2 years from the date of purchase

Support

Manuals & Technical Documents

Product Sheet

Download