AVPro Edge AC-MX-42X 40Gbps 8K 4x2 HDMI Matrix Switcher
- 4x2 HDMI Matrix
- 8K Home Theater Upgrade
- Legacy (4K/1080p) AVR Workaround
- Dual Output for working with Dual Screens
Overview
The AC-MX-42X is a four-input, dual-output HDMI matrix switcher. It supports HDMI 2.1, HDCP 2.3, and up to 8K video resolution with 40Gbps bandwidth capacity. This matrix switcher is perfect for working with the latest gaming consoles, streaming devices, and satellite receivers, connecting them to 8K TVs and projectors. In addition, this matrix equalizes and amplifies the output to ensure HDMI signals will transmit through long HDMI cables without losing quality.
Our best developers have been hard at work bringing our integrators an easy-to-use web-based user interface that allows them to set up, troubleshoot, and control this 8K 4x2. The AVPro Edge User Interface (AEUI) allows for easy configuration and setup. This 8K matrix switcher also comes with a screen on the unit that can tell you the IP address for connecting directly to your control system.
Features
- HDMI 2.1
- FRL (5) at 40Gbps
- 4K 120fps or 8K 60fps Support
- Bitstream Audio (Dolby Atmos, DTS-X)
- Downscale (4K & 1080p) for AVR workaround
Specifications
| Video: | |
| Video Resolutions | Up to 8k 60Hz 4:2:0/8K 30Hz 4:4:4/4k 120Hz |
| SMPTE/CTA/DCI Resolutions | Up to 4K 120Hz 4:4:4/8K 60Hz 4:2:0 |
| VESA Resolutions | Up to DCI 4k (4096x2160) |
| HDR Formats | HDR10, HDR10+, HLG, DV, Dynamic HDR |
| Chroma Supported | 4:2:0, 4:2:2, 4:4:4 |
| Color Space | YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT. 2020, DCI-P3 D65) |
| Deep Color | Up to 16-Bit (1080p), up to 12-Bit (4k), up to 10-Bit (8k) |
| Audio: | |
| HDMI Bitstream | LPCM up to 7.1, 192 kHz 24-Bit, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos (All Formats), Dolby AC-4, DTS-Digital Surround, DTS-ES Discrete, DTS-HD High Res Audio, DTS-HD Master Audio, DTS:X |
| Extracted Audio (SPDIF TOSLINK) | LPCM up to 5.1 96 kHz 24-Bit, Dolby Digital 5.1, DTS-HD HIGH Res Audio |
| Extracted Audio (Stereo RCA) | PCM 2 CH |
| Extracted Audio Modes | Bind to Output |
| HDMI 2.0 Distance (up to 18Gbps TMDS): | |
| Passive HDMI IN/OUT | Up to 10 Meters/32.8 Feet |
| AOC HDMI IN/OUT | Up to 100 Meters/328 Feet |
| HDMI 2.1 Distance (up to 40Gbps FRL 5): | |
| Passive HDMI IN/OUT | Up to 4 Meters/13.1 Feet |
| AOC HDMI IN/OUT | Up to 100 Meters/328 Feet |
| Other: | |
| Bandwidth | 40Gbps (FRL 5) |
| HDCP | 1.4, 2.X Support |
| Control: | |
| Ports | LAN, RS232, IR Window |
| Drivers | C4, RTI, ELAN, CRESTRON, URC (For More Information - See Drivers Page on AVProEdge.com/Drivers |
| AVPro WebUI | YES |
| Ports: | |
| HDMI | Type A |
| LAN | RJ45 w/ Web Interface/ Control |
| Audio (Extracted Digital) | Toslink |
| Audio (Extracted Analog) | L/R Audio |
| IR RX | Window Only (Remote Included) |
| RS232 | 3 Pin Terminal Block |
| Environmental: | |
| Operating Temperature | 23 to 125°F (-5 to 51°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Humidity Range | 5-90% RH (No Condensation) |
| Power: | |
| Power Consumption (Total) | 7 Watts Max |
| Power Supply - Matrix | Input: AC 100-240V ~ 50/60Hz Output: DC 5V 2A |
| Dimensions: | |
| Dimensions (Unit Only - Height/Depth/Width) | mm: 20.5 x 94 x 232.98 inch: .9 x 3.7 x 9.17 |
| Dimensions (Packaged Height/Depth/Width) | mm: 76.2 x 184.1 x 317.5 inch: 3 x 7.25 x 12.5 |
| Weight (Unit) | 1 lbs. (0.45 Kg) |
| Weight (Packaged) | 1.8 lbs. (0.82 Kg) |
| *Specifications subject to change without notice. Mass & dimensions are approximate | |