2GIG TAKE100-345 Wireless Hardwire Takeover Module, 345MHz
TAKE100-345
Wireless Hardwire Takeover Module, 345MHz
SKU
205534
MPN:
TAKE100-345
- Converts 8 zones per Module
- Converts hardwired loops into up to 8 Wireless Zones
- 2GIG 345MHz Compatible ]
Overview
The 2GIG Wireless hardwire Takeover Module provides installers with an easy method for taking over a 12-volt prewired security alarm system and converting the existing hardwired zones into 2GIG wireless technology. The Takeover Module cannot be used to monitor Carbon Monoxide (CO) or Fire detection zones and is intended for indoor use only.
Features
- Converts 8 zones per module (additional modules may be added)
- Converts hardwired loops into as many as 8 wireless zones
- Supports up to 500 mA for wired motion sensors and glass break sensors
- 2GIG 345MHz compatible
- Can be powered by and use backup battery of an existing alarm panel
- Charging circuit for backup battery with LED status lighting
- ETL listed
- Supports encryption via an on-board switch
Specifications
| Transmitter Frequency | 345MHz |
| Input Voltage | 16.5~20VAC |
| Backup Battery | Up to 12VDC 7AH |
| Dimension | 3.53″ (89.7mm) x 2.56″ (65.0mm) x 1.22″ (31.0mm) |
| Weight | 3.21 oz |
| Houston Material | ABS Plastic |
| Operating Temperature | 32°-120° F (0° to 49° C) |
| Humidity | 5-95% Non-Condensing |
| AC barrel connector | DC power barrel plug, type A: 5.5mm OD, 2.1 mm ID |
| Aux Output | 10-16V, 500mA |
| Supported Zones | 8 wired zones; 1 self-monitor zone |
| Regulatory | ETL, FCC, Industry Canada |
Support
Manuals & Technical Documents
Specification2GIG_TAKE100-345_Datasheet_Rev-A_0811_7.pdf